If you’ve always wanted to build your own Linux router, Ars Technica has the definitive how-to guide. From hardware to software and configuration, it’s all here–How to build a Linux router.

After finally reaching the tipping point with off-the-shelf solutions that can’t match increasing speeds available, we recently took the plunge. Building a homebrew router turned out to be a better proposition than we could’ve ever imagined. With nearly any speed metric we analyzed, our little DIY kit outpaced routers whether they were of the $90- or $250-variety.

Naturally, many readers asked the obvious follow-up—”How exactly can we put that together?” Today it’s time to finally pull back the curtain and offer that walkthrough. By taking a closer look at the actual build itself (hardware and software), the testing processes we used, and why we used them, hopefully any Ars readers of average technical abilities will be able to put together their own DIY speed machine. And the good news? Everything is as open source as it gets—the equipment, the processes, and the setup. If you want the DIY router we used, you can absolutely have it. This will be the guide to lead you, step-by-step.

If you don’t understand things like NAT, IP addresses and all of that, it’s okay–it’s all explained. Read the whole thing and get to building!

Clef two-factor authentication